Best LED Headlight Conversion Kits For Sale Online

Last updated on August 25th, 2018 at 04:36 pm

LED headlights can save you money by having fewer accidents, because LED headlights are significantly brighter than halogen headlights. But what can you do if your car or motorcycle doesn’t have LED lights? Well, why not install them yourself? In this article, we’ll show you to do a LED headlight conversion, then we will show you some of the best LED headlight conversion kits for sale online.

DIY LED Headlight Conversion

LED Headlight ConversionThere are essentially six steps for you to follow when doing a LED headlight conversion. They are: 1. unscrewing the light cover, 2. pulling out the bezel out, 3. check the wiring, 4. cut the wires (if necessary), 5. connect the wires. 6. mount the new LED housing. The tools that you will need In order to install a LED headlight conversion kit are a screwdriver, a set of wire crimpers, a pair of wire cutters, some wire strippers, and, of course, the brand new LED headlights themselves. Let’s take a closer look at each of the steps to installing a LED headlight conversion kit.

Step 1: Unscrewing the Cover

For this first step in installing a new LED headlight conversion kit, you will need a Phillips Screwdriver. Use the screwdriver to unscrew the lens from the car’s fender. After that is completed, you should be able to see the headlight bulb itself.

Step 2: Pulling the Bezel Out

Next, you will need to pull the light bezel out of the fender. However, before you do anything else, you should leave the old headlight bulb hanging from the fender. How the wires are attached to the headlight bulb is important. You are going to have to check the wires.

Step 3: Checking the Wires

Next up, using a 12-volt testing light, find out which of the wires goes to the running lights, which of the wires goes to the brakes, and which one of the wires goes to the car’s turn signal. In order to perform this step, tap the brakes, and each consecutive wiring. Notice that f the wire glows, that has to be your braking wire. If you don’t know this, you won’t be able to wire the LED headlights correctly.

Step 4: Cutting the Wires

Use your wire cutter, wire stripper, and your wire crimpers to properly cut the wire. After you have acquired each of the above wires, cut each wire and carefully strip the ends. After that is finished, you should crimp one end of the wires with a wire butt connector.

Step 5: Connecting the Wires

Connect the wires together appropriately using the butt connector, while making sure that each of the LED connections are correct with no mistakes.

Step 6: Mounting the LED Housing

Place the LED headlight conversion housing into the fender. Screw the lens into the proper place with the right screws and your Phillips screwdriver. After you have that done, check to be sure that the wiring is correct and that the LED headlight bulbs actually work.

As you can see, the steps are simple to install an LED headlight conversion, as long as you know just a tiny bit of what you are doing, and so long as you have the proper tools for the job. The connections are very important, as the wrong connections could cause the LED headlights to not work at all.

Best LED Headlight Conversion Kits For Cars

OPT7FLUXBEAM4.6ReviewsCheck Price
New BrightsNB-80W-90074.2ReviewsCheck Price
Sirius4G LED3.9ReviewsCheck Price
KensunKensun-LED4.2ReviewsCheck Price
Genssi5K-LEDKIT3.4ReviewsCheck Price

Return to LightHeadz homepage.

>>Find More LED Headlight Conversion Kit For Your Car<<

Speak Your Mind